RevitaLight™ Therapy Face Mask

8 wavelengths. One flawless face.

You scanned the code — you're already ahead. Here's everything: how to use your mask, which light does what, and how to track every session for visible results in 4–6 weeks.

↓ Start my routine Track today →

✨

You're already one of the serious ones.

Most people buy a device and never commit to the routine. The fact that you're here — reading the instructions, doing it right — puts you in the small minority who actually get results. And it will show.

Step 1 · The session

Your 5-step mask ritual.

Five steps, 10–15 minutes. Do this 3–5 times per week for the first 4–6 weeks. Clean skin, right mode, relax — that's it.

1

Prep your maskAdjust the head strap for a comfortable fit. Thread the strap through the holes on each side. Put on safety goggles (optional but recommended).
2

Choose your modePress the M button to cycle through the 8 light therapy modes. Pick the one that matches your goal (full guide below).
3

Set your timePress the E button to select session length: 5, 10, 15, 20, 25 or 30 minutes. Start with 10–15 minutes.
4

Start treatmentPress and hold the Power button (⏻) for 2.5 seconds. Mask will beep and lights turn on. Relax and let the therapy work — it auto-shuts off when done.
5

Adjust brightness (optional)Use + / − buttons any time during the session to increase or decrease brightness to your comfort.

💡 Pro tip: Start with clean, dry skin — no thick creams or actives. The light penetrates best without a barrier.

Step 2 · The 8 modes

Which color, for what?

Press the M button to cycle through. Each wavelength targets a different skin concern — pick the one that matches what you want to fix today.

Red · Collagen & anti-aging

Best for fine lines, wrinkles, firmness

Blue · Bacteria control

Best for acne and breakouts

Yellow · Skin tone

Best for redness and sensitivity

Green · Pigmentation

Best for dark spots and uneven tone

Purple · Combination therapy

Best for acne + anti-aging together

Cyan · Soothing

Best for calming and reducing inflammation

Orange · Vitality boost

Best for dull, tired-looking skin

Near-Infrared · Deep penetration

Best for deep collagen production

💡 Not sure which to pick? Start with Red for anti-aging or Blue for breakouts. These are the two most-used modes and deliver the fastest visible results.

What to expect · Week by week

Real results take time. Here's the honest truth.

RevitaLight™ works at a cellular level — stimulating collagen, killing surface bacteria, and calming inflammation. Visible results typically appear after 4–6 weeks of consistent use.

🌱

Week 1–2

The foundation phase

Skin looks calmer and slightly brighter after each session. Breakouts may start to quiet down. No dramatic changes yet — and that's normal.

✨

Week 3–4

First visible changes

Most users notice more even tone, less redness, fewer new breakouts. Skin texture feels smoother. Keep going.

💎

Week 4–6

The "wow" moment

This is where RevitaLight™ really shows up. Firmer skin, softened fine lines, clearer complexion. Compare your Day 1 photo — you'll be shocked.

👑

Maintenance

The full effect

Drop to 3 sessions per week, 10–15 minutes each. You've built the results — now you're maintaining them. This is your new baseline.

🔁 Every face is different. Age, skin type, sleep, hydration and stress all affect the timeline. Be patient — you're doing the right thing.

Step 3 · Track it

Your 4-week session tracker

Tap a session to mark it done. Aim for 4 sessions per week. One tap = one win for your skin.

sessions completed Do your first session to start your streak ✨

Quick wins · Set yourself up

Your "set-and-forget" setup

Check these off once and you won't have to think about it again.

Fully charge before first useUSB-C cable, 5V/1A. Red light flashes while charging (~4 hours). Unplug when steady.

Lock in your session timeEvening wind-down, before bed, or during your skincare. Pick one and stick to it.

Keep the mask on your vanityCharged and ready. Out of sight = out of routine.

📸 Take a "Day 1" photo nowSame angle, same lighting, no filter. You'll want it at week 4.

Accept the "Never miss twice" ruleMissed a session? Fine. Two in a row breaks habits. Get back on it.

Care & safety

Take care of your mask.

🧼

Wipe with a soft cloth only

NOT waterproof. Keep dry. Never rinse or submerge.

🔌

USB-C charging

5V/1A. Red light flashes while charging. Full charge ~4 hours.

🏠

Store safely

Cool, dry place away from children. Don't disassemble or attempt repairs.

👁️

Protect your eyes

Safety goggles are optional but recommended. Close eyes during sessions.

⚠️ Do NOT use if: You are pregnant, nursing, or under 18 · You have active skin infections, wounds or rashes · You have light-sensitive conditions (lupus, rosacea, eczema) · You take photosensitizing medications · You've recently used retinoids (wait 24 hours) · You have epilepsy or seizure disorders.

Troubleshooting

Something not right?

🔌

Won't turn on

Charge the battery fully before first use.

💡

Lights dim

Press the + button to increase brightness.

⚡

Won't charge

Check cable connection and try a different power source.

😣

Uncomfortable fit

Adjust head strap tension until it sits snug but not tight.

🔆

Too bright

Press the − button to dim, or keep eyes closed.

📧 Still stuck? Email support@botaniqueparis.com — we'll get you sorted.

FAQ

Questions we get a lot.

How often should I use it?

Weeks 1–4: 10–15 minutes, 5x per week. Maintenance: 10–15 minutes, 3x per week. Results typically visible after 4–6 weeks of consistent use.

Can I use multiple modes in one session?

Yes — many users layer modes. Try Blue for acne control for 10 minutes, then switch to Red for anti-aging for another 10. Just keep total session time under 30 minutes.

Should I apply skincare before or after?

Use the mask on clean, dry skin with no products — the light penetrates best without a barrier. Apply your serums, moisturizer and eye cream after the session, when your skin is primed to absorb.

Can I use it with retinol or acids?

Wait at least 24 hours after using retinoids before a RevitaLight™ session. Avoid strong AHA/BHA acids on the same day. Alternate nights for the best results without irritation.

Do I need the safety goggles?

They're optional but recommended — especially at higher brightness. If you skip them, keep your eyes closed throughout the session.

Is it safe for sensitive skin?

Yes, for most people — start with Yellow (soothing) or Cyan (calming) modes at low brightness. Do a short 5-minute test session first. Stop immediately if you feel any discomfort.

Can I use it after Botox or fillers?

Wait at least 2 weeks after any injectable treatment. When in doubt, check with your aesthetician or doctor first.

What if I miss a session?

Don't sweat it. One missed session has zero impact. The rule is: never miss twice. One day off is a blip. Two in a row is the start of a broken habit. Just get back on it tomorrow.

For external cosmetic use only. Not intended to diagnose, treat, cure or prevent any disease. Always follow the directions on your product packaging. Consult your doctor if you have a medical condition, are pregnant or nursing. Results may vary.